| View previous topic :: View next topic |
| Author |
Message |
baz2003uk Savage Newbie

Joined: Jan 12, 2012 Posts: 46 Location: uk
Status: Offline
|
Posted: Sat Jan 28, 2012 6:24 pm Post subject: big bores 8 or 4 |
|
|
i got my flux 2nd hand and it had 8 bigbores fitted very very stiff setup
anyway had a shock break on me today so stripped it off and had a big clean up so stripped it all down but only replaced 1 on each corner rather than the 2 it had
seems softer but not that bad
will running on 4 big bores cause problems and what is the handling like with 4 on
i find with 8 it tends to flip over on hard cornering is this due to it being allot stifer/
chers baz |
|
|
| Back to top |
|
 |
rumpity_z28 Savage Extraordinaire

Joined: Nov 07, 2009 Posts: 1327 Location: hope B.C.
Status: Offline
|
Posted: Sat Jan 28, 2012 7:28 pm Post subject: Re: big bores 8 or 4 |
|
|
| yeah the truck comes stock with 4 big bores but guys will run 8 if they are getting big air just to help soak up the landings, its a personal thing |
|
|
| Back to top |
|
 |
baz2003uk Savage Newbie

Joined: Jan 12, 2012 Posts: 46 Location: uk
Status: Offline
|
Posted: Sat Jan 28, 2012 8:09 pm Post subject: Re: big bores 8 or 4 |
|
|
im not into big air (well not at the moment)
what would be a good setup for good handling |
|
|
| Back to top |
|
 |
lightningdt Savage Superstar

Joined: Mar 11, 2004 Posts: 273 Location: Calif.
Status: Offline
|
Posted: Sat Jan 28, 2012 8:15 pm Post subject: Re: big bores 8 or 4 |
|
|
They only come with 4 stock and there in the center hole on the shock tower. Try that and let us know how better or worse it handles!
-DT- |
|
|
| Back to top |
|
 |
baz2003uk Savage Newbie

Joined: Jan 12, 2012 Posts: 46 Location: uk
Status: Offline
|
Posted: Sat Jan 28, 2012 8:42 pm Post subject: Re: big bores 8 or 4 |
|
|
| lightningdt wrote (View Post): | They only come with 4 stock and there in the center hole on the shock tower. Try that and let us know how better or worse it handles!
-DT- |
cool cheers m8
also on the shocks there is 2 spacers is that also fitted from stock or has the last owner added them? |
|
|
| Back to top |
|
 |
lightningdt Savage Superstar

Joined: Mar 11, 2004 Posts: 273 Location: Calif.
Status: Offline
|
Posted: Sat Jan 28, 2012 8:50 pm Post subject: Re: big bores 8 or 4 |
|
|
Stock I think they come with a 3mm 8mm and a 10mm. The preload spring then the pink spring. I can tell you that the tall spacers with the preload spring and the RED springs are too much for just driving around. I get to test out 3 different setup's on 3 different trucks tomorrow if it's not wet. I'll report back anything I find.
-DT- |
Lightningdt |
|
| Back to top |
|
 |
baz2003uk Savage Newbie

Joined: Jan 12, 2012 Posts: 46 Location: uk
Status: Offline
|
Posted: Sat Jan 28, 2012 9:04 pm Post subject: Re: big bores 8 or 4 |
|
|
that would be great mate if you could
i was thinking of either yellow or red hellfire springs and then playing with the spacers to get a good handling |
|
|
| Back to top |
|
 |
Hier Savage Superstar

Joined: Mar 24, 2010 Posts: 304
Status: Offline
|
|
| Back to top |
|
 |
rumpity_z28 Savage Extraordinaire

Joined: Nov 07, 2009 Posts: 1327 Location: hope B.C.
Status: Offline
|
Posted: Sat Jan 28, 2012 10:22 pm Post subject: Re: big bores 8 or 4 |
|
|
| you can download a manual for free from hpi's website it will give you a lot of good info |
|
|
| Back to top |
|
 |
PowerStroker Savage Enthusiast

Joined: Nov 11, 2007 Posts: 117
Status: Offline
|
Posted: Sat Jan 28, 2012 10:35 pm Post subject: Re: big bores 8 or 4 |
|
|
| I love 8 shocks on my flux. I am running blue spring up front and silver springs in the back and it works well. I love how it soaks up landings and how it holds up the back end when going full throttle. |
|
|
| Back to top |
|
 |
braco Savage Extraordinaire

Joined: Sep 23, 2010 Posts: 1041 Location: Zagreb, Croatia
Status: Offline
|
Posted: Sun Jan 29, 2012 2:08 pm Post subject: Re: big bores 8 or 4 |
|
|
I'm running stock 4 Big Bore setup. Stock oil, stock springs... Handles GREAT! I have an XL though, extended TVP's and extended axles and 1/2 inch offset wheels.
Stock setup is a bit too soft for jumping. |
Silent D RC Join us!
 |
|
| Back to top |
|
 |
messiah1 Savage Extraordinaire

Joined: Oct 31, 2011 Posts: 507
Status: Offline
|
Posted: Mon Jan 30, 2012 8:57 am Post subject: Re: big bores 8 or 4 |
|
|
| I ran 8 on mine because I found that it was to soft on landings. But I asked around and found that if you move to the red springs and 40-45wt oil, it will be much more responsive. That's what I ended up doing and now I run just the four. Handles well and gobbles up those big jumps. |
|
|
| Back to top |
|
 |
|